Western: Yankee Springs

For posting trail-specific conditions and problems

Re: Western: Yankee Springs

Postby dirtjunkie » October 16th, 2013, 4:50 am

billmania wrote:Tree down between mile 4 and mile 5...gonna need to be sawed out.


Thanks for the heads up!

Will a hand saw do it?

Is it prior to the guard rail ...or after?

I can drive my truck back prior to riding tonight....just looking to make it as less of a search as possible.

~ Mark
dirtjunkie
 
Posts: 782
Joined: September 16th, 2009, 9:43 am

Re: Western: Yankee Springs

Postby billmania » October 16th, 2013, 9:36 am

Image its about where the blue dot is, its kinda big. you're gonna want a chainsaw.
User avatar
billmania
 
Posts: 108
Joined: March 10th, 2008, 10:41 am

Re: Western: Yankee Springs

Postby dirtjunkie » October 16th, 2013, 10:46 am

billmania wrote:Image its about where the blue dot is, its kinda big. you're gonna want a chainsaw.


Thanks! I'll do what I can.
dirtjunkie
 
Posts: 782
Joined: September 16th, 2009, 9:43 am

Re: Western: Yankee Springs

Postby dirtjunkie » November 20th, 2013, 10:09 am

Yankee was hit hard by the winds from this past Sunday. Gonna try to do what I can today....but a crew with a chainsaw or two is what is needed. Sending a note to the TC.

~ Mark
dirtjunkie
 
Posts: 782
Joined: September 16th, 2009, 9:43 am

Re: Western: Yankee Springs

Postby dirtjunkie » November 23rd, 2013, 3:43 pm

Quite a lot was accomplished over the last few days at Yankee. Should be good to go...and ready for the Turkey Burn ride next Friday!!
dirtjunkie
 
Posts: 782
Joined: September 16th, 2009, 9:43 am

Re: Western: Yankee Springs

Postby ReidRules18 » November 24th, 2013, 4:33 pm

I was out there today. Looks like someone did quite a lot of work taking care of the downed trees! Trail was open and tree free.
"Only when the last tree has died and the last river been poisoned and the last fish has been caught will we realize we cannot eat money"-Cree Indian
User avatar
ReidRules18
 
Posts: 1452
Joined: May 26th, 2003, 9:26 pm
Location: Grand Rapids!

Re: Western: Yankee Springs

Postby kevin g » November 29th, 2013, 7:21 am

I am thinking of coming down for the Turkey Burner later this morning, but am wondering if the trail is passable with a normal mountain bike with normal tires (Racing Ralphs). I am a little embarrassed to say I have never tried mountain biking on snow.
kevin g
 
Posts: 51
Joined: December 6th, 2009, 6:54 pm
Location: Belmont

Re: Western: Yankee Springs

Postby Mike_D » November 29th, 2013, 7:28 am

kevin g wrote:I am thinking of coming down for the Turkey Burner later this morning, but am wondering if the trail is passable with a normal mountain bike with normal tires (Racing Ralphs). I am a little embarrassed to say I have never tried mountain biking on snow.


You should be fine with the Ra-Ra's. I have 2.25" Ra-Ra's myself and I've been riding Luton and the ski area with a couple inches of snow and it's fine but obviously more work on climbs and you need to be more aware in the corners. Check out this link and it looks like there is only a couple of inches of snow down in that area:

http://www.weatherstreet.com/city_snow_depth/49058-Hastings-MI-snow-depth.htm
User avatar
Mike_D
 
Posts: 2179
Joined: March 29th, 2004, 11:22 am
Location: Grand Rapids

Re: Western: Yankee Springs

Postby kevin g » November 29th, 2013, 7:52 am

Thanks. Pretty sure I am going.
kevin g
 
Posts: 51
Joined: December 6th, 2009, 6:54 pm
Location: Belmont

Re: Western: Yankee Springs

Postby Mike_D » November 29th, 2013, 6:31 pm

How was the snow depth? I saw a pic from the Turkey Burner ride and the ground looked pretty bare.
User avatar
Mike_D
 
Posts: 2179
Joined: March 29th, 2004, 11:22 am
Location: Grand Rapids

Re: Western: Yankee Springs

Postby kevin g » November 29th, 2013, 9:04 pm

There was barely more than a dusting. The snow really wasn't an issue at all.
kevin g
 
Posts: 51
Joined: December 6th, 2009, 6:54 pm
Location: Belmont

Re: Western: Yankee Springs

Postby lampenj » November 30th, 2013, 4:59 pm

From the ride yesterday: http://youtu.be/C7V4SPvPTGQ
lampenj
 
Posts: 203
Joined: May 8th, 2011, 5:56 pm
Location: Holland, MI

Re: Western: Yankee Springs

Postby MFawley » December 5th, 2013, 3:41 pm

I plan on trying to head out here on saturday afternoon. Anything I should know about? Are the trails marked well enough for someone who's never ridden them before?
MFawley
 
Posts: 245
Joined: December 3rd, 2013, 9:12 pm

Re: Western: Yankee Springs

Postby Mike_D » December 5th, 2013, 3:48 pm

MFawley wrote:I plan on trying to head out here on saturday afternoon. Anything I should know about? Are the trails marked well enough for someone who's never ridden them before?


They're marked well enough. There are a couple spots that you could take a right or a left but just follow the tire tracks and you'll stay on track.
User avatar
Mike_D
 
Posts: 2179
Joined: March 29th, 2004, 11:22 am
Location: Grand Rapids

Re: Western: Yankee Springs

Postby giantone » December 5th, 2013, 8:49 pm

Mike_D wrote:
MFawley wrote:I plan on trying to head out here on saturday afternoon. Anything I should know about? Are the trails marked well enough for someone who's never ridden them before?


They're marked well enough. There are a couple spots that you could take a right or a left but just follow the tire tracks and you'll stay on track.

Yep, generally take right turns and you'll do the whole trail.
giantone
 
Posts: 229
Joined: September 10th, 2011, 9:34 am
Location: Grand Rapids

PreviousNext

Return to Trail Conditions

Who is online

Users browsing this forum: Toy529 and 5 guests