650b Velocity blunt wheelset

Where individuals (non-commercial sellers) can buy or sell stuff.

650b Velocity blunt wheelset

Postby procos » June 6th, 2012, 6:55 pm

I have a 650b wheelset for sale. The front wheel has 20mm Thru Axle Hope Pro II hub in silver with Velocity Blunt rims and DT Swiss spokes. The back wheel has Shimano XT hub in sliver with Velocity Blunt rims and DT Swiss spokes. Both rims are silver as are both hubs and spokes. The front wheelset has 405 miles on it and the back hub has the same but the back rim only has 30 miles on it. The back rim was just replaced this spring because the older rim had some rock dings in it. Also the front hub can be converted easily to 15mm or standard skewer you just need to get the conversion kit from Hope. It takes about 5 minutes to do. I will take some pictures later tonight and get them up. I am asking $300 for the pair.

Image
Image
Image
Image
Image
Image

Thanks,

Chuck
procos
 
Posts: 13
Joined: September 29th, 2011, 10:08 pm

Re: 650b Velocity blunt wheelset

Postby morgan1819 » August 16th, 2012, 10:45 am

I would be interested at about $130.00
morgan1819
 
Posts: 20
Joined: May 29th, 2009, 5:28 pm

Re: 650b Velocity blunt wheelset

Postby procos » August 16th, 2012, 8:51 pm

Not a chance. I am firm at $300 and if they don't sell I'll keep them as a backup set. To all interested I have a set of Pacenti Neo Moto's I'll throw in for free with the wheelset.
procos
 
Posts: 13
Joined: September 29th, 2011, 10:08 pm

Re: 650b Velocity blunt wheelset

Postby deezler » August 17th, 2012, 9:01 am

Where are you located?

Have a weight for the wheelset?

Have a pic of the neo motos? How much wear?

Thanks.
deezler
 
Posts: 229
Joined: April 9th, 2011, 9:10 pm
Location: Ypsilanti

Re: 650b Velocity blunt wheelset

Postby procos » September 5th, 2012, 3:03 pm

Sorry for the late response but haven't been on the forum in a few weeks. I am in Bloomfield Hills. Not sure of the weight on wheelset and I don't have a scale to weigh them. No pictures of the Neo Motos but there is a lot of tread left. If interested PM me because it shows up in my email and I can reply quickly.

Thanks,

Chuck
procos
 
Posts: 13
Joined: September 29th, 2011, 10:08 pm

Re: 650b Velocity blunt wheelset

Postby dennismurphy » January 4th, 2013, 11:27 pm

deezler wrote:Where are you located?

Have a weight for the wheelset?

Have a pic of the neo motos? How much wear?

Thanks.


per the Velocity website- weights listed

http://www.velocityusa.com/default.asp?contentID=633
User avatar
dennismurphy
 
Posts: 5972
Joined: June 20th, 2002, 10:29 pm
Location: Grandville, MI


Return to Classified Ads

Who is online

Users browsing this forum: No registered users and 4 guests