Crank arm legnth

Where to ask questions on riding skills, training, nutrition, and bike repair

Re: Crank arm legnth

Postby amadkins » June 12th, 2013, 5:50 pm

Laser4G63 wrote:I was using 175mm arm length, but since switched to 170mm. I supposed it may have a lot to do with the type of rider you are, whether you mash or spin. I am a spinner and notice I can do so better with the 170s. I know 5mm isn't much, but it's working for me. I am 5'11", btw.


This for me as well. I'm long in the torso tho. I found 175s hurt the front of my knees on long rides.
amadkins
 
Posts: 673
Joined: July 22nd, 2007, 6:18 pm
Location: White Lake, MI

Re: Crank arm legnth

Postby jiml » June 12th, 2013, 7:49 pm

Hey bax,

I ran 180's back in the day as well, but on the 20/24", you're mostly standing and sprinting from corner to corner. Good leverage for out of the gate and accelerating quickly out of the turns, but I dunno if I'd want to be spinning those long cranks while sitting in the saddle for long stretches when you want to get a good ankle whip going. Just food for thought, as I've pondered this question as well. YMMV.

My guess is the knee pain is the extreme flexion/extension at the top (12/6 o'clock) of the stroke due to the longer cranks, if you don't have the bone length. Again, prolly not too much of a deal while standing but the saddle time is what kills it.

You ran a gear other than 44x16? 8)

Jim

btw, I'm ~5' 10" /* edit - and run 175mm on my 26/29" bikes */
Last edited by jiml on June 12th, 2013, 8:43 pm, edited 1 time in total.
jiml
 
Posts: 46
Joined: February 15th, 2012, 8:49 am

Re: Crank arm legnth

Postby MediumRB » June 12th, 2013, 8:31 pm

I'm 5'8" with 30" inseam. I spin more than I mash, so narrow tread and 170mm crank arms for me.
Everything I ride makes sense.
User avatar
MediumRB
 
Posts: 485
Joined: April 27th, 2011, 2:48 pm
Location: Waterford

Re: Crank arm legnth

Postby iamkickstand » June 12th, 2013, 8:56 pm

165mm on the DH bike, I think 170 on the xc bike
iamkickstand
 
Posts: 3214
Joined: May 11th, 2010, 9:00 am


Return to Tips, Training & Techniques

Who is online

Users browsing this forum: Bing [Bot] and 1 guest